Rule 500 Next Gen Automatic Submersible Bilge Pump

Rule 500 Next Gen Automatic Submersible Bilge Pump is an extremely efficient, compact pump designed to keep the boats Bilge clear of nuisance water with the convenience of automatic sensors so you don't even have to turn it on manually. The pump will turn on for a 1 second every two and a half minutes to check for water, determined by sensing resistance on the impeller. If water is detected it will continue running till the water is gone and resume its intermittent 2.5 minute checks.

• 500GPH
• 12V or 24V available
• Note: Will pump any liquid that enters intake, not differentiating between water and oil
• Automatic sensor will keep water between 3mm low and 10mm high
• 1.6 amp / 0.8 amp draw respectively
• Will typically only consume 0.2 >Amps per day
• Fully submersible
• New design increase flow and efficiency to even higher rates of earlier models at equivilent amperage
• 16 gauge tin coated copper wiring with silicone infused water blocking - prevents water wiking down the wiring
• Thermal Cut Out integrated in the motor keeps the pump and vessel protected
• Ignition protect motor
• Backflow prevention via removable check-valve in discharge nozzle
• Threaded discharge Port allows for easy installation and maintenance
• Air vents hidden throughout prevent air locking in tricky installations and work keeping the check valve operating properly
• Stainless steel shaft
• Snap on strainer base
• 20mm threaded hose outlet

For more information, check out our articles  What size >Bilge Pump do I need? or How high does my >Bilge Pump pump?