Raymarine EV-150 Hydraulic Autopilot System Pack

Raymarine EV-150 Hydraulic Autopilot System Pack is a complete autopilot-in-a-box kit that is ready to install on many popular fishing and cruising powerboats with hydraulic steering.

EV-150 system is engineered specifically to meet the needs of small to medium sized hydraulically steered vessels with a steering ram capacity between 4.9 cu. in.( 80cc) and 14.0 cu in (230cc).

Suits 12-volt DC electrical systems only.

Pack includes:

• EV1 Sensor Core
• ACU150 actuator Control Unit
• p70Rs Autopilot controller
• Type 1 Hydraulic Pump
• Evolution Autopilot cabling kit

EV1 Sensor Core

• 9-axis sensor combining advanced solid-state sensors with Evolution Autopilot processor
• IPX6 and IPX7 waterproofing
• Monitors vessel motion
• Precision monitoring of Heading, Pitch, roll, and yaw
• Simple SeaTalk^ng connectivity to the control >Head and ACU.
• Fast and reliable Heading data for MARPA, >Radar overlay, and Heading modes on Raymarine multifunction displays.
• Mount above or below deck

ACU150 actuator Control Unit

• Provides power and control to Type-1 Hydraulic Drive Unit
• Connects to SeaTalkng network for communication with its other peripherals

p70Rs Autopilot Controller

• Display: 3.5" colour TFT LCD screen, 320 x 240 Resolution
• New LightHouse user interface
• Supported Autopilot modes: Auto; Standby; Pattern; Track; wind Vane; Power Steer and Jog Steer
• SeaTalk^ng/ NMEA 2000 and SeaTalk connectivity (no bridging required)

Type 1 Hydraulic Pump

• Operates the boat’s steering mechanism
• Contains a precision Gear pump and check valve driven by a servo motor
• Max. Stall Pressure: 50bar (750psi)
• Peak Flow Rate: 1000cc/min (67in³/min)

Evolution Autopilot cabling kit inc:

• 1 x SeaTalk^ng Power Cable (0.4m)
• 1 x SeaTalk^ng Backbone Cable (5m)
• 1 x SeaTalk^ng Spur Cable (0.4m)
• 1 x SeaTalk^ng 5-way Connector Block
• 2 x SeaTalk^ng T-piece Connector
• 2 x SeaTalk^ng Terminator