Fender

A cylindrical or round cushion (often inflatable) used to prevent damage to the Hull sides of a Boat, typically used when tied up at Dock.

 

Tips for inflating your Fender:

 

  • The best Way to inflate a fender is just pushing air pressure from a compressor with a flat >Head against the valve and the fender will inflate.
  • It is also possible to inflate the fender with a bicycle pump with the special adaptor (FLG321).
  • The best inflation pressure is 0.2 bar. (2.9 psi) You should be able to press the body of the fender easy with your flat hand.
  • Do not use a needle (soccer ball) type inflation piece, as the pin can damage the valve. Correct piece to use is an air gun with tapered end that fits into the end of the valve.
  • Be careful not to over inflate.

 

Deflating your fender:

 

  • Simply push a pen slightly in the valve to let the air out. If a valve is leaking due to dirt or any other reason, you can replace it by turning in a bolt M3 then pulling the valve out with a pair of tongs.
  • After inspecting you can push a valve back in the fender with your hand or a pen.

 

Related Products

Items 1 to 20 of 37 total

per page

Items 1 to 20 of 37 total

per page