Bilge Pumps Submersible - Rule

Description: Rule Bilge Pumps are known through out the world and set the standard by which others are judged.

• Totally submersible.
  
• Positive snap lock strainer base.
  
• Ignition protected.
  
• Stainless Steel Shaft.
  
• CE and ISO 8849 Marine Certifications.

Bilge Pumps Submersible - TMC

BlueRay Manta Boat Security Alarm

Description: BlueRay Manta™ system monitors bilges, batteries, shore power and boat security, delivering alarm messages directly to multiple mobile phones for immediate action. 5 alarm zones are surge protected resistive loop circuits designed to operate with normally open and normally closed sensors. These can be passive sensors such as: heavy duty reed switches, floor pressure mats and proximity switches to protect hatches, doors, walkways and dinghies.

Blue Ray Manta Boat Security Alarm also supports active sensors such as dual technology motion detectors, floor pressure detectors and beam sensors to protect larger cabin spaces, deck areas and outdoor walkways. Multiple sensors may be fitted to each alarm zone enabling larger vessels to be protected. Each sensor alarm may be custom named. Individual alarm circuits can be programmed to trip instantly or as a preset delay.

Alarm zones can be wired to automatically turn on the cabin/deck lights when tripped. This is intended as a courtesy function for the owner boarding at night however it also serves to illuminate potential thieves. Once an alarm is triggered the local siren is switched on and the alarm message sent to all listed mobile phones. Nautilus Marine Insurance offer 10% discount!!

• 5 alarm zones, multiple sensor capability.
• 3 warning zones for bilge and shore power.
• Reports alarms to 6 mobile phones.
• Optional alert to a standard telephone.
• Fully customisable SMS alarm messages.
• Automatic cabin/deck light activation.
• Remote system diagnostics.
• Remote sensor isolation and activation.
• Remote control of electrical equipment.
• Power:12 or 24 Volt, less than 6ma.
• Monitors and reports low battery voltage.
• Designed for the marine environment.
• Install kit includes: 119 dB Siren, Blue Strobe, 2 Reed Switches, 1 Flashing warning LED, Mounting Hardware (screws, cable ties, terminal blocks, adhesive anchors and fuses), 2 BlueRay warning stickers.

Blueray Sting Boat Security Alarm

Description: BlueRay Sting Boat Security Alarm protect trailer boats and smaller yachts. When on land, monitor for movement using the integrated detector. When on the water, monitor for trespassers, break in and sinking. The 2 sensor inputs on the BlueRay Sting system are surge protected resistive loop circuits designed to operate with normally open and normally closed sensors. These can be passive sensors such as: reed switches, floor pressure mats and dinghy switch to protect hatches, doors, walkways and dinghies. The system also supports active sensors such as motion detectors, proximity detectors, beam sensors and under deck/floor stress sensors to protect larger cabin spaces, deck areas and outdoor walkways. Each alarm may be isolated individually - this allows, for example, a boat that is normally kept on a trailer to be put on a mooring by isolating the inertia sensor but leaving Geo-fence on. Nautilus Marine Insurance offer 10% discount!!

• Reports alarms to 4 mobile phones.
• Solid state movement alarm. This detects physical movement of the boat.
• Two external sensor zones.
• One external warning input.
• Alarm output to drive siren/strobe.
• Geo-fence alarm, with GPS option. Utilising the add on GPS module detect that the boat has moved.
• Help - Sends request for Help to programmed mobile phones. System can operate with or without a monitoring service and therefore ongoing monitoring fees are not required unless a service is selected.
• Builtin back up battery.
• Install kit includes: 119 dB Siren, 1 flashing warning LED, 2 Reed Switches, Mounting Hardware (screws, cable ties, terminal blocks, adhesive anchors and fuses), BlueRay warning sticker.