Whale Gusher 10 MK3 Manual Bilge Pump

Whale Gusher 10 MK3 Manual >Bilge Pump has a reputation for reliability.

The large valves ensure smooth flow and reduce the likelihood of blockage by any stray debris in the Bilge water. Used extensively for manual pump-out of Effluent holding systems. Variable mounting positions enable the pump to be installed either on >Bulkhead or floor. The design gives instant access to all parts for maintenance.

Made from epoxy Resin coated alloy, Stainless Steel, and neoprene Rubber. Suitable for use with oils and diesel transfer if fitted with nitrile service kit.

Specifications:

• Capacity: 55 L/m (12 g/m) @ 60 strokes per minute
• Max lift: 4m
• Max head: 4
• Hose size: 38mm
• Mount screws: 8 r/h

Service kits are also available:

• Nitrile Service Kit (131280): Oil and chemical tolerant but have a reduced service life in high UV exposure. Includes:
  • 1 Valve Gasket
  • 2 Valves
  • 1 Buffer
  • 2 bridge Pieces (with 2 screws)
  • 1 Diaphragm (Nitrile) - inc. 2 screws

   

• Neoprene Service Kit (131281): Suited to exposed installations but are less tolerant to oils and chemicals. Includes:
  • 1 Valve Gasket
  • 2 Valves
  • 1 Buffer
  • 2 Large bridge Pieces (with 4 screws)
  • 1 Small bridge Piece (with 4 screws)
  • 1 Diaphragm (Neoprene)
  • 1 Valve (Nitrile)

For more information, view the article What size >Bilge Pump do I need?