This product has been discontinued, and replaced with Navico Hydraulic Autopilot Pack with Precision 9 Compass

<p>APM105 system pack</p> Zoom

APM105 system pack

13% OFF

Navico Hydraulic Autopilot Pack with RC42 Compass

SKU: APM105
Brand:
Find it In: Fishing and Marine Electronics, Autopilots.,

Status: Discontinued

Product Description
Details

Navico Outboard Pilot Hydraulic Pack is an add-on system designed for boats up to 30ft with a SINGLE Outboard Motor (linked by tie bar or in series - not in parallel. See fifth diagram above). It's an easy-to-install system pack for Lowrance HDS and Simrad NSS2 displays, with hydraulic connectors and hoses all included.

The RC42 >Rate Gyro Compass will give smoother steering results in offshore conditions compared to the Point1 Compass system.

 

Suits the following single ram hydraulic steering 

  • Teleflex SeaStarHC5345, HC5347, HC5348, HC5358
  • Teleflex BayStarHC4600,HC4645, HC4647, HC4648, HC4658
  • Other balanced rams 100cc-180cc

 

Perfectly integrated with your Lowrance HDS Gen2, Gen2 Touch or Gen3, or Simrad NSS 7/9/12 evo2 series, with no need for a separate display control, as everything is included in the kit and DIY instructions make it easy to self install.

 

This easy-to-use Autopilot system allows quick access steering of the outboard engine, keeping your Boat on Course so you can focus more on fishing. When connected to your Lowrance or Simrad display, the Outboard Pilot can steer to a Waypoint or along a route, select a turn pattern or simply Hold a constant Heading.

 

Software upgrades are required to connect to existing Lowrance HDS & Simrad evo2 displays.

HDS Gen2 keyboard V4.0 2 March 2015 or later

HDS Gen2 Touch V4.5 4th June 2015 or later

HDS Gen3 V5.0 January 2016 or later

Simrad evo2 V3.5 December 2015 or later

 

The pack includes:

  • RC42 Rate Compass with 5m cable
  • NAC-1 Autopilot Computer
  • PUMP-1 Hydraulic Pump – 0.8L reversible hydraulic pump
  • Standby-Auto button
  • Micro-C network components including 4 Way NMEA2000 joiner
  • Pump Fitting Kit ( 2.5ft send, reserve reservoir hoses, 4 right-angle adapters, 4 straight through adapters, 2 T-adapters, half litre of hydraulic oil). (Not illustrated)

 

Features:

  • IPX5 waterproof rating
  • Mounts anywhere on the dash and changes Autopilot from Standby to Auto mode with a single press
  • Steer to Heading, Course or Route
  • Automatic Turn Patters
  • NAC-1 Plug & Socket connectors reduce the installation time
  • VRF (Virtual >Rudder Feedback) simplifies pilot installation, eliminating the need for a >Rudder position sensor.
  • High efficiency, super-quiet 0.8L hydraulic Gear pump
  • 12V Supply
  • Max Drive output 8amps continuous, 16amp Peak

 

Replacement Parts
Replacement Parts
Specifications
Additional Information
MPN000-11750-001
Replacement Product (SKU)APM106
BrandNavico
Country of ManufactureMexico
Reviews
Write Your Own Review

Only registered users can write reviews. Please, log in or register