Isotherm Water Heaters

Isotherm Water Heaters achieve optimal water heating in two ways, firstly by an immersed electric heating element (immersion heater) and secondly by utilising the boat's engine water heat (Heat Exchange). Isotemp water heaters may be used with fresh water or salt water cooled engine systems. The immersion heater and heat exchanger are positioned in the lowest part of the tank, providing even thermo cycle heating of the water in the system. The engine water heat exchanger coil is extra long for faster heating, especially handy on sailing yachts, which may run their engine for short periods only. The water inlets and outlets are positioned to minimise mixing of cold water into the hot, by the incoming water. The immersion heater has been designed to enable easy removal to allow for inspection and cleaning of the tank. The materials used in the construction of the tank are of the highest quality. Acid resistant Stainless Steel AISI 316 is used for all parts of the tank that are in contact with water. The internal tank is insulated with expanded polyurethane insulation ensuring low temperature loss. The outer cover and mounting feet have been crafted from non-magnetic stainless steel AISI 304. The fixing feet are adjustable to 360º, allowing the tank to be mounted horizontally or vertically.

• Max pressure: 6.0 bar
• Power: 240V 750W

Code	Size	Weight	Dimensions	Unit	$AUD(i)		ADD
135692	20L	9kg	655mmL x 295mmD	EACH	$1171.00		<<CLICK TO ADD
135696	25L	11kg	780mmL x 295mmD	EACH	$1236.00		<<CLICK TO ADD
135700	24L	11kg	460mmL x 395mmD	EACH	$1230.00		<<CLICK TO ADD
135702	40L	17kg	460mmL x 395mmD	EACH	$1320.00		<<CLICK TO ADD
135704	50L	20kg	750mmL x 295mmW	EACH	$1690.00		<<CLICK TO ADD
135706	75L	24kg	1040mmL x 395mmD	EACH	$2011.00		<<CLICK TO ADD